Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

same host in two different vpn tunnels and config question

I have an ASA firewall with several IPSEC vpn's off it. I have to create another one and the remote "interesting traffic" will use the same host ip address as another existing tunnel. The local interesting traffic will be different, so my question is will this still work, and will the "ip verify reverse-path" command have any conflicts if it sees the same destination ip host off two different tunnels, or is it smart enough to distinguish them?

1 REPLY
New Member

Re: same host in two different vpn tunnels and config question

Well I think this is not going to work. You can't have two tunnels with same destination range. You need to ask a new one to NAT at their end so that you can define different destination range in your box.

127
Views
0
Helpful
1
Replies
CreatePlease to create content