Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Security-Context and Site-to-Site VPN

I've configured multiple security contexts with asa 5550. Now I want to use for one context an IPSEC-Tunnel over the internet to connect a remote-site.(VPN Site-to-Site)

Is it possible to use overlapping IP-Ranges and can I locial seperate the VPN's ? I need the same functionality as VRF-Lite/IPSEC with an IOS Router.

2 REPLIES

Re: Security-Context and Site-to-Site VPN

Hi,

You might want to have a look on the documentation again.

If you configure multicontext, you cannot use ISPEC or SSL anymore, along with some other features:

Unsupported Features

Multiple context mode does not support the following features:

•Dynamic routing protocols

Security contexts support only static routes. You cannot enable OSPF, RIP, or EIGRP in multiple context mode.

•VPN

•Multicast routing. Multicast bridging is supported.

•Threat Detection

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/contexts.html

Please rate if this helped.

Regards,

Daniel

New Member

Re: Security-Context and Site-to-Site VPN

Thanks for your help....and the link.

137
Views
5
Helpful
2
Replies