Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Setting a VPN with two RVS4000

Hello friends;

Could someone refer or recommend any guide that explains how to configure a VPN with two RVS4000?

Tanks in advance.

  • VPN
Everyone's tags (1)

Re: Setting a VPN with two RVS4000

New Member

Re: Setting a VPN with two RVS4000

Hello Federico

That link appears broken. Do you have an alternative?


Actually I have a problem that I am seeking help on.

Attached is a schematic of the implementation we have.
IPSec VPN is running successfully.
The issue is that we want to access the CRM service and the Exchange via HTTPS from the internet.
The firewall in the RVS4000 at Station A has been configured to allow HTTPS (port 443) traffic to (Exchange) but when attempting to bind the same port 443 to .8.202 ffor CRM traffic the RVS4000 refuses to accept the config. I cant find anywhere to tweak the settings to accept the configuration of multiple services on port 443.
I have sending CRM traffic to station B and set the router's to forward https traffic to, again the RVS4000 at station B cannot ping the machines in the .8.0 subnet. A traceroute shows that it is forwarding all packets via the ISP's interface (even for packets to I attempted a static route and it just wouldnt accept it's interface as the default gateway.
Please do you have any ideas?.
This widget could not be displayed.