Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Setting New Ipsec Tunnel "3Des, Md5 " On Cisco 877W To Netgear Fvs338

Pls help . i got SDM 2.5 running on my machine ..with default setting connected....New .. nothing setting yet...

I need to setup this vpn from one of the sites with 192.168.47.0 address to HQ 192.168.100.0

Thanks

3 REPLIES

Re: Setting New Ipsec Tunnel "3Des, Md5 " On Cisco 877W To Netge

Hi,

This link shows a L2L configuration on an IOS router using SDM to an ASA.

Just pay attention to the router part of the configuration.

Let us know if you have any questions.

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

Federico.

New Member

Re: Setting New Ipsec Tunnel "3Des, Md5 " On Cisco 877W To Netge

thanks for the reply....

You mean it will be easier with just cisco gears, ...soo i can't get it work between cisco 877w and netgear fvs338.

cheers;

Re: Setting New Ipsec Tunnel "3Des, Md5 " On Cisco 877W To Netge

I'm not saying is not going to work.

If the NetGear supports the standard IPsec there's no reason why it would not work.

The link was to show you the configuration example on setting a L2L IPsec tunnel on a Cisco IOS device.

Obviously, you can establish the tunnel between Cisco devices as well.

Federico.

522
Views
0
Helpful
3
Replies