I am looking for the correct IOS to install on my 2811 so I can set up vpn groups, much like you would with a PIX for remote employees running the Cisco VPN Client software.
I have done this on a Pix 525 and 506e, but the company I work for today does not have a PIX, they employ a Juniper firewall and Juniper SSL device. I am creating a backdoor in the event the firewall dies and we cannot route internally remotely to gain cli access to bring the firewall back up. What I have to work with is a 2811 so any help would be appreciated.
Hi, you have your platform model, you pretty much can dive into the Cisco Feature navigator and get the needed features and IOS, pretty much IPSEC is the required feature so go over this link and either search by feature or by platform it will give you the needed IOS. You need to have a CCO account to access this page and to download the software too I believe.
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...