Single VPN client to connect to two different remote offices
Is it possibel to use a Cisco VPN client to connect two different remote offices at the same time. It seems that once you have established a connection to one remote office, you cannot connect to another profile unless you disconnect to the first one.
Re: Single VPN client to connect to two different remote offices
Yes, you are right. You can only connect to 1 remote site at a time with VPN Client.
However, if you have site-to-site VPN between the 2 remote sites, you can configure it so once you are connected to 1 remote site, the vpn client can also have access to the other remote site via the site-to-site VPN between the 2 remote sites. In this case, you would need to add the vpn client pool subnet to the crypto ACL on the site-to-site vpn tunnel and the vpn client split tunnel needs to include the other remote LAN.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...