How would I configure Site to Site VPN between 2 publicly routable networks. All client computers in both of these networks are using public IP addresses.
I have done lots of site to site VPNs for private networks, and my understanding is that the site to site VPN between 2 public networks would be same except I would leave out the "no NAT" configuration.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...