08-28-2014 04:00 AM
Hello,
I've created a site to site vpn from pix to azure using vpn wizard.
in monitoring tab in IKE SAs I can see the status of the connection is QM_IDLE
and in IPSec VPNs I can see a row for this vpn but no packet is transferring.
Please let me know if anybody knows what I am doing wrong with this?
08-28-2014 04:15 AM
Hi,
So seems the L2L VPN connection is up but no traffic is flowing?
I would presume that in that case the L2L VPN connection is probably negotiated from the side of Azure.
You might be missing NAT0 configuration for the subnets/addresses configured on the L2L VPN connection. This would explain atleast why connection could be up (negotiated from remote site) but no traffic was flowing (not having proper nat configuration would make it so that traffic from your side would not match the VPN configurations)
Naturally we could take a look at the PIX configurations.
- Jouni
09-10-2014 02:41 AM
Hi,
Thanks so much for your reply. I've managed to connect to Azure, after creating new VM in azure virtual network.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide