site to site vpn key

[jerry.larson]

Is there a command to see my vpn key in clear text as opposed to the * on an ASA when I do show run

thanks,

[Marvin Rhoads]

Yes. The cli command:

more system:running-config

...will include pre-shared keys as plain text.

You might want to use output qualifiers (e.g., " | i pre-shared" or " | b tunnel-group" after the above command) to narrow down the output if all you want is the key value.

One can also perform a backup from ASDM and get the information as well.

[jerry.larson]

Thank you, I knew I had seen it before.

[Marvin Rhoads]

You're welcome. Please rate the answer and mark your question answered if it helped you.

Sent from Cisco Technical Support iPhone App