Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

site-to-site vpn NAT/PAT interesting traffic config question

I have an ASA running 8.4.2 code and am trying to verify Site to site configs before tunnel migrations. specifically if the NAT/PAT and ACL is correct. Phase 1 is already defined and working, as well as crypto maps and tunnel groups.

When defining the interesting traffic in the ACL do you use the NAT or the real IP? Is the order of the ACL correct?

First :

The vedor's network is a 192.168.1.10 and needs to be NATed to 10.1.0.2

name 5.6.7.8 VendorName

object-group network VendorName-R
 network-object host 192.168.1.10

object-group network VendorName-NAT-R
 network-object host 10.1.0.2

object-group network VendorName-L
 network-object host 10.1.1.3

access-list VendorName-crypto extended permit ip object-group
VendorName-L object-group VendorName-NAT-R
nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R
destination static VendorName-R VendorName-R

Second:

The vendors network is on 192.168.1.0 and 192.168.2.0, these need to be PATed to 10.1.0.2 and 10.1.0.3

192.168.1.20 and 168.1.21 need to be staticly NATed to 10.1.0.4 and 10.1.0.5

name 5.6.7.8 VendorName

object-group network VendorName-R-1

network-object subnet 192.168.1.0 255.255.255.0

object-group network VendorName-R-2

network-object subnet 192.168.2.0 255.255.255.0

object-group network VendorName-R-3

network-object host 192.168.1.20

object-group network VendorName-R-4

network-object host 192.168.1.21

object-group network VendorName-NAT-R-1

network-object host 10.1.0.2

object-group network VendorName-NAT-R-2

network-object host 10.1.0.3

object-group network VendorName-NAT-R-3

network-object host 10.1.0.4

object-group network VendorName-NAT-R-4

network-object host 10.1.0.5

object-group network VendorName-R

network-object object VendorName-NAT-R-1

network-object object VendorName-NAT-R-2

network-object object VendorName-NAT-R-3

network-object object VendorName-NAT-R-4

object-group network VendorName-L           

network-object host 10.1.1.3

network-object host 10.1.1.6

access-list VendorName-crypto extended permit ip object-group VendorName-L object-group VendorName-R

nat (inside,outside) 1 source dynamic VendorName-L VendorName-NAT-R-1 destination static VendorName-R-1 VendorName-R-1

nat (inside,outside) 1 source dynamic VendorName-L VendorName-NAT-R-2 destination static VendorName-R-2 VendorName-R-2

nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R-3 destination static VendorName-R-3 VendorName-R-3

nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R-4 destination static VendorName-R-4 VendorName-R-4

1 ACCEPTED SOLUTION

Accepted Solutions

site-to-site vpn NAT/PAT interesting traffic config question

Your interesting traffic acl MUST be the NAT IP address.

1 REPLY

site-to-site vpn NAT/PAT interesting traffic config question

Your interesting traffic acl MUST be the NAT IP address.

447
Views
0
Helpful
1
Replies
CreatePlease to create content