Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Site to Site VPN - NAT

Hello all,

I would like to have some guidance in regard NAT over Site-to-Site VPN.

 

Client will only allow traffic from the specific NAT'd IPs (10.x.x.x)

 

The traffic that must be allowed across the VPN:

 

I have internal network as 192.168.1.0 / 255.255.255.0 - all that client traffic must be PAT’d to 10.74.25.12

All client traffic requires access to the following bank servers.  198.x.x.225 and 10.15.4.9

 

Internal workstation ip address: 192.168.1.47 NAT’d to 10.74.25.2 (STATIC)

 

ASA 5505 - 9.1 

 

Thanks in advance,

O's

 

 

Everyone's tags (1)
1 REPLY
Silver

It will be easy to understand

It will be easy to understand your scenario if you send the relevant configuration on your ASA. Are you talking about remote access ipsec VPN or its a Site to Site VPN ?

43
Views
0
Helpful
1
Replies
CreatePlease login to create content