I have 2 Cisco routers and I am trying to set up a site to site vpn between them. I go through the wizard in CCP but when I go to test the tunnel I get the following reason for failure on both routers:
"There is no response from the peer *peer ip address*"
Here is the running config from both routers
Current configuration : 6807 bytes
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
logging buffered 51200
logging console critical
enable secret 5 $1$SL.z$pj3WaB1WTxiLux46ltlMo/
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
clock timezone PCTime -7
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
Re: Site To Site VPN not connecting with other site
Actually this is a different site to site issue, then the other one I was having. I solved that one. the subnet of 255.255.0.0 on Vlan1 on router B is correct (as far as I know), because that router have devices attached to it with ip of 10.10.3.3, 10.10.10.2, 10.10.1.1, etc...So, as far as I know, (I didn't set up Router B) the subent of 255.255.0.0 is correct.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...