I recently configured a site-to-site VPN for one of my remote offices to our corporate office. Our corporate office (site 1) has several other point to point networks I'd like to be able to access from the site-to-site VPN. The site-to-site VPN is setup with a PIX 515e at site 1, and a Cisco 851 router at site 2. The other networks at site 1 are physically connected to a Cisco 3925 router, which is behind the PIX.
From my research, EIGRP routing is not a possibility over the site to site VPN. When I tried to put in static routes, I'm not sure if I'm not doing them correctly or not. I also tried definiting the additional networks as "interesting traffic," but I couldn't seem to get it working either.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...