Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Site-to-Site VPN sends but doesn't receive

I have 5510 and 5505 ASAs at 2 locations. I just set up a site-to-site VPN using the ASDM IPSec VPN Wizard. I left the default encryption and authentication and defined the remote and local networks. When I ping something on the remote network and watch the logs, I see it go through and it is not denied, but the ping gets no reply from the other side. I also notice when monitoring the VPN, on side has TX packets, but no RX packets and the other side is the opposite. Any ideas what could be causing this?

Thanks,

Scott

124
Views
0
Helpful
0
Replies
CreatePlease to create content