Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Site to site VPN tunnel with IPSEC .

Hi all ,

I have configured S2S VPN from my HO to my BO . VPN has established & up on both side . my PC IP address is 192.168.10.88 & my BO PC IP address 192.168.20.5 .

 Note :

1. I try to ping my PC IP address ( 192.168.10.88) from MY BO PC -result is request timeout . then i did continues ping with same ip address result is request timeout .

2.Aside i ping 192.168.20.5 ( MY BO PC) from my HO PC -Result is first request timeout after that getting reply .then same side i checked my BO PC (Earlier i put continues ping to my HO PC 192.168.10.88 from BO my PC ) get reply .

what is my understanding - my BO PC while ping to HO PC not receive packet but same time from MY HO PC send ping to BO get received .

Can anyone help me Please . i am facing the issue in my working daily !!! 

2 REPLIES

Hi , Enable inspect icmp on

Hi ,

 Enable inspect icmp on global policy ,on  your BO Firewall device .  After that you should be able ping from your BO to your HO

 

HTH

Sandy

New Member

Hi Santhosh kumar ,         

Hi Santhosh kumar ,

              Thanks  you . your correct  i have added the enable the ispect icmp on global policy even though i tried it's not happening Later have  google it then come to know HO ASA - BO ASA have same Access list should be there. 

My mistake : BO ASA i have allowed one IP Pool in Access list but HO ASA i have added particular ip address . 

 

I Hope this may helpful for all !!

39
Views
0
Helpful
2
Replies
CreatePlease to create content