Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

site to site vpn using ctcp

I would like to create a site vpn between 2 871's using ctcp. Is this possible and is there a configuration example of how to do this. I can configure ctcp but neither end will initiate the session using ctcp. They use udp instead.

3 REPLIES
Silver

Re: site to site vpn using ctcp

Use the IPSec over TCP option in order to attain this

New Member

Re: site to site vpn using ctcp

I am attempting to use IPSEC over TCP and configure ctcp on the 871. However, it appears that the 871 is incapable of initiating the session. I suspect it is in fact listening on the correct port, and would establish a session if it initiated from the other end. But I want to originate the session from the 871 and it doesn't appear to do that.

New Member

Re: site to site vpn using ctcp

ctcp is a listening option, by default the router will try to use standard IPSEC unless both deviced are NAT traversal capable then it will use IPSEc ove UDP, but it will not try to initiate using TCP

387
Views
0
Helpful
3
Replies
CreatePlease login to create content