Site-to-site VPN with 3 sites

[AlexSzigetvary]

I have 3 sites. On each site there is a ASA5505 resp. 5510.

I have a working ipsec tunnel between site A and B, and between B and C. What I am looking for is a way to pass traffic between A and C without creating an own tunnel between A and C. So somehow a way that the ASA on site B routes the traffic from tunnel site A to the tunnel site C.

Is that possible?

Any hints are very welcome.

Alex

[acomiskey]

Yes, this is possible.

Here is a doc describing how to do it with remote access vpn to site to site. You can do it the same way with site to site instead of remote access.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

Basically you just need to add the interesting traffic to the tunnels, add the extra nat exemption to the tunnels, and apply same-security-traffic permit intra-interface to site B.

Post up some configs if you need help.