Site to Site VPN with Overlapping network and other network Access..
i need to setup a site to site Tunnel to a remote site. My remote site got the network which has overlapped with one of our network(192.168.10.0/24) in my site. remote site dont need to access this network(192.168.10.0/24) in my site ,but they have to access other networks (192.168.x.0)
i have prepared the below configuration ,relevant to nat to achiev the goal. Appreciate help to verify and help to achive this...
i have attached one rough diagram also..
Mysite ------- access-list acl-httsamorocco extended permit ip 192.168.73.0 255.255.255.0 192.168.74.0 255.255.255.0 access-list nonat extended permit ip 192.168.x.0 255.255.255.0 192.168.74.0 255.255.255.0
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...