[SOLVED] RV320 site to site VPN with ASA 5510 not working
I have been banging my head against the wall all day trying to get a site to site tunnel to work from a remote rv320 to an ASA 5510 at the main office. The tunnel will not come up no matter which options I try. Has anyone else gotten a rv320 to establish a site to site ipsec tunnel with an ASA? If so, can you please share the config or the options you chose to make it work?
When debugging the ASA it appears to complete PHASE 1 but then gets an error (Received non-routine Notify message: Invalid ID info) before killing off the tunnel. Any ideas? I am at a loss right now. I have retyped the preshared keys on both sides dozens of times and confirmed the protected subnet information matches for the respective sides.
More info: ASA is running 9.1(4) RV320 is running v1.1.1.06
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...