Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Specifying static routes to a PIX

scenario:

core routers connected via vlan 15 to a pix device. everytime a route is specified i used the next hop as vlan 15 ( the interface) rather than the ip address of the PIX device. is this a security issue and would it be a issue with proxy-arp?

tx

sidd

1 REPLY
Anonymous
N/A

Re: Specifying static routes to a PIX

PIX performs the routing process based on the directly connected routes, static routes and OSPF - available in the latest PIX 6.3 version.

Static routes are directly linked to the outbound interface that connects to the next hope router. This adds more extra security.

Syntax:

#route

//Example: default route is allowed only through the outside interface.

241
Views
0
Helpful
1
Replies
CreatePlease to create content