We have moved away from the Cisco VPN Client and are using PPTP & L2TP, since some of our clients are 64-bit. The problem I am running into is that when connected, everything must be referenced by IP, and local network & internet access is halted.
How can I have the PIX assign a default domain, and more importantly, how can I setup a split-tunnel so that I can get local access while connected to the PIX?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...