Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Split Tunnel

Hi Guys,

I am just wondering if remote access VPN with split tunnel is using the corporate connection for surfing the internet or the home user own internet connection?

Any help will be greatly appreciated.

Thanks,

Lake

2 ACCEPTED SOLUTIONS

Accepted Solutions

Split Tunnel

Dear Lakeram,

Split-tunneling allows you to access certain resources thru the tunnel and any other traffic will be sent to your local proxy.

The VPN traffic is defined by the VPN endpoint, for instance:

192.168.1.0/24 ---- ASA ---- Internet ------------------------------- ADSL --- VPN client

You can have the ASA push the 192.168.1.0/24 network to the client. Once connected if the client tries to access anything out of the network scope, this traffic will be sent to the local network..

Here is an example with both ASA and Router.

ASA/PIX: Allow Split Tunneling for VPN Clients on the ASA Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

ASA 8.x : Allow Split Tunneling for AnyConnect VPN Client on the ASA Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml

Router Allows VPN Clients to Connect IPsec and Internet Using Split Tunneling Configuration Example

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

I hope it helps.

Thanks.

Split Tunnel

You are correct.

* Please do not forget to rate the posts.

5 REPLIES

Split Tunnel

Dear Lakeram,

Split-tunneling allows you to access certain resources thru the tunnel and any other traffic will be sent to your local proxy.

The VPN traffic is defined by the VPN endpoint, for instance:

192.168.1.0/24 ---- ASA ---- Internet ------------------------------- ADSL --- VPN client

You can have the ASA push the 192.168.1.0/24 network to the client. Once connected if the client tries to access anything out of the network scope, this traffic will be sent to the local network..

Here is an example with both ASA and Router.

ASA/PIX: Allow Split Tunneling for VPN Clients on the ASA Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

ASA 8.x : Allow Split Tunneling for AnyConnect VPN Client on the ASA Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml

Router Allows VPN Clients to Connect IPsec and Internet Using Split Tunneling Configuration Example

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

I hope it helps.

Thanks.

Split Tunnel

I take that surfing the web goes through the local proxy and not the company network? Is that correct?

Thanks,

Lake

Split Tunnel

You are correct.

* Please do not forget to rate the posts.

Split Tunnel

I would like to you thank you for for your help.

Regards,

Lake

Split Tunnel

You are very welcome

Please count on us at any time!

744
Views
4
Helpful
5
Replies
CreatePlease login to create content