Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

SRP521w Issues

I have the following problem that I can't seem to get my hands around.  This is my first time dealing with SRP520 series and I have traditionaly been a CLI guy with all IOS. 

BranchA (Main Office):  192.168.15.0 /24 Ver. 1.2.5 (001) Nov 8 2012

BranchB:  192.168.16.0 /24 Ver. 1.01.27 (007) Jun 15 2012

BranchC:  192.168.17.0 /24 Ver. 1.01.27 (007) Jun 15 2012

BranchD:  192.168.18.0 /24 Ver. 1.01.27 (007) Jun 15 2012

The goal is to have Branches B, C, & D connect via a VPN Tunnel back to A and all sites communicate with each other. 

I was able to get VPN Tunnels up previously but could only use 1 IKE Policy and as I attempted another the device threw up errors.  I researched and the common thread was to upgrade the firmware.  So, I upgraded all of the devices to the above firmware.   Now, it allows me to have multiple IKE policies, but NOTHING works.   

Now, I cannot even get to the internet on Branches B, C, & D.  Nothing changed configuration wise, so I'm wondering if anyone can give me guidance on correct firmware.           

Test.jpg

166
Views
0
Helpful
0
Replies
CreatePlease to create content