Lets see: We have a pix connected to a internal network with an web application using ssl. On the outside network we have a 6mbps to internet. Some clients, from different medias, connect to the application. We have had problems only with users whose media is VSAT. Can anyone help ous on this??? We are thinking in the delay of the VSAT.
To control the time that a data terminal ready (DTR) signal is held down when a line clears, use the modem dtr-delay command in line configuration mode. To restore the default hold down time, use the no form of this command.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...