I am attempting to configure an ASA 5505 with SSL VPN. The users request is from anywhere, be able to web into the Cisco ASA. Https://myasa.here.com. At that point, we will require them to authenticate through Active Directory via ACS 5.2. The Cisco ASA 5505 is a 50 user ASA. We have also purchased the mobile license as well as a 10 user premium license. That was a bear in itself.
My questions are:
1. How do I configure the SSL setup to use a 3rd party certificate, such as a Comodo certificate?
2. How do I determine which version of AnyConnect I should use for this? We will support windows, macs, linux and smart phones as well as Tablets.
3. if you do a show version, you get all the capabilites of the ASA of which some are disabled or deactivated. Does someone have a chart that will show us, what needs to be purchased to activated each line entry on the ASA? Is there an all encompassing PAK?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...