Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

SSL VPN Tunnel Mode, "page cannot be found" - Urgent!

Hi experts,

I'm trying to configure a tunnel mode SSL VPN (the one that downloads the client to your PC to give full access to the network) and need your help urgently, sorry for the urgency but my client needs this asap and my wifes due our second baby as of last Monday so time is of the essence

I get a certificate not valid Internet explorer when I browse to http://publicip/remote, which is fine as it's a self signed cert, but when I click "continue" I get a "page cannot be found" error.

Am I missing something from the config or am I missing files from flash (web files)?

I've attached the config as well as a sh ver and dir flash.

I ran the SDM to configure and as such it has inserted an ACL of permit IP any to host publicip, I don't like this much and want to remove it, can you advise?

many thanks

Dave

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SSL VPN Tunnel Mode, "page cannot be found" - Urgent!

Hello,


Try changing this command in your context:

gateway gateway_1 domain domain.com

to

gateway gateway_1


the 'domain' specified here is not the actual domain, but a portion after the URL.  With the configuration you have, you'd have to connect to the following url to get a webpage:

https://publicip/domain.com


Which is probably why you're getting an error when you just browse to https://publicip

--Jason

3 REPLIES
Community Member

Re: SSL VPN Tunnel Mode, "page cannot be found" - Urgent!

Sorry guys just bumping this thread.

Cisco Employee

Re: SSL VPN Tunnel Mode, "page cannot be found" - Urgent!

Hello,


Try changing this command in your context:

gateway gateway_1 domain domain.com

to

gateway gateway_1


the 'domain' specified here is not the actual domain, but a portion after the URL.  With the configuration you have, you'd have to connect to the following url to get a webpage:

https://publicip/domain.com


Which is probably why you're getting an error when you just browse to https://publicip

--Jason

Community Member

Re: SSL VPN Tunnel Mode, "page cannot be found" - Urgent!

That's great Jason, it fixed the issue and it now works. It just doesn't work with Windows 7, but fine with XP, something to do with Active X according to Cisco and only if an ASA is in use will it work ok.

thanks again

Dave

630
Views
0
Helpful
3
Replies
CreatePlease to create content