SSLVPN Package SSL-VPN-Client (seq:1): installed Error: Other

[b.schlegel]

Trying to install the anyconnect-win-2.5.2019-k9.pkg package on a Cisco 1811 router running c181x-advipservicesk9-mz.124-22.T5.bin, when I run the command in config mode "webvpn install svc flash:anyconnect-win-2.5.2019-k9.pkg" I get "

SSLVPN Package SSL-VPN-Client (seq:1): installed Error: Other" some people suggested reformating the flash drive, does anyone know a workaround or a way to do this without loosing the running configuration?  I think there is a problem with the file structure on the router, the install package is able to install "webvpn" directory.  Any ideas are welcome, thanks!

hostname#sh flash
-#- --length-- -----date/time------ path
1     23472512 Feb 23 2012 21:10:34 c181x-advipservicesk9-mz.124-22.T5.bin
2            0 Feb 23 2012 21:37:50 webvpn
3      4686889 Feb 23 2012 21:18:46 anyconnect-win-2.5.2019-k9.pkg

3772416 bytes available (28168192 bytes used)

Cisco 1811 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of memory.
10 FastEthernet interfaces
1 Serial interface
1 terminal line
31360K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Hostname#

[Jason Gervia · Accepted solution]

I think this is because you don't have enough space - it tries to copy the file to the webvpn directory.

Make sure the webvpn install command is not in your configuration. 

Move the anyconnect package to the webvpn directory

run

webvpn install svc flash:/webvpn/anyconnect-win-2.5.2019-k9.pkg

And see if that helps.

[b.schlegel]

That was it!  Some reason it couldn't install it in the main directory of flash.....Thank you for your help!!!!

hostname#config t
Enter configuration commands, one per line.  End with CNTL/Z.
hostname(config)#webvpn install svc flash:/webvpn/anyconnect-win-2.5.2019-k9.pkg
SSLVPN Package SSL-VPN-Client (seq:1): installed successfully

hostname(config)#

[morangpour]

hi 

i have the same problem with anyconnect-win-4.3.02039-k9.pkg on ios 15.1

but i have 1gb cf and i think the problem in my case is different.

what to check first?