I know that the VPN Clients make the most sense on this but the powers that be want ti to be an ASA. I have an ASA 5510 in the US with a connection to the internet via a business class Cable connection. In Germany we have a DSL connection and an exsisting network that we don't want to change but we want the to have a VPN connection back to our US office. I suggested we just load the VPN CLient on the desktop and give them access that way but nobody wanted to do it that way. So I have to take an ASA 5505 place it on the internal network in Germany and get it to connect back the ASA 5510 in the US. First off is this possible and if it is can someone please help with with some direction of how to start it. I have attached the current ASA Germany Config. and a rough drawing of how they want this done.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...