Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Strange issue with adding SSL license

I just applied 25-50 SSL upgrade license to a failover cluster and it caused some issues.  Once they were applied to both ASA's the failover went nuts, and flapped between both boxes until they were reloaded.

Here is the strange thing though. The images for the webvpn were removed from the configuration and had to be added back.

Version running is 8.2(2).

First why would it affect the failover in such a way?  I know it disabled it when the first license was applied, but when the one for the standby was applied, re-enabling failover should not have caused them to flap back and forth like it did.

Second, why would the svc images be removed from the configuration?

I have never had this problem applying licenses to an ASA before.

New Member

Re: Strange issue with adding SSL license

It running asa822-4-K8, not asa822-k8 as previously mentioned.

I found the reason the configuration disappeared, the standby unit was missing the anyconnect file from flash.

Now if I can figure out why failover went bezerk after adding the license.