Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Telnet/ssh ASA 5550

hi,

how to configure telnet/ssh on ASA 5550 from outside.

Thanks

1 REPLY
Cisco Employee

Re: Telnet/ssh ASA 5550

Hi,

You cannot telnet to the outside interface of the ASA in clear text.

You have couple of choices:

Telnet through IPSEC

SSH

HTTP over SSL (https) with ASDM

ASA7.0 Allowing Telnet Access:

The security appliance allows Telnet connections to the security

appliance for management purposes. You cannot use Telnet to the

lowest security interface unless you use Telnet inside an IPSec

tunnel.

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/

mgaccess.htm#wp1054101

To configure SSH, please check following URL.

PIX/ASA 7.x: SSH on the Inside and Outside Interface Configuration Example

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_confi

guration_example09186a008069bf1b.shtml

Regards,

Arul

** Please rate all helpful posts **

854
Views
5
Helpful
1
Replies
CreatePlease to create content