There is no anyconnect template, you need to install a anyconnect client image first error

[babiojd01]

Here is the error message I get when trying to customize the gui text and messages option in asdm. Everything is installed that's required. VPN works like its supposed to and I cannot figure out why this doesn't work. Any other asa I try this with works but this one. It is a failover pair of 5508 doing SSLVPN anyconnect.

[Philip D'Ath · Accepted solution]

It will probably be a combination of the ASA software and AnyConnect version being used.  Perhaps try making them the same as another known working configuration.

[babiojd01]

Tried 9.6.2(11) and asdm 7.7.1. Same error.

[Rahul Govindan]

Paste the output of "show run webvpn" if you could please.

[babiojd01]

webvpn
 enable outside
 anyconnect-custom-attr Netop description Netop policy enforcement
 anyconnect image disk0:/anyconnect-win-4.2.05015-k9.pkg 1
 anyconnect image disk0:/anyconnect-macosx-i386-4.2.05015-k9.pkg 2
 anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 3
 anyconnect profiles Cisco_Anyconnect_VPN_PIE_client_profile disk0:/Cisco_Anyconnect_VPN_PIE_client_profile.xml
 anyconnect enable
 cache
  disable
 error-recovery disable
 hostscan data-limit 300