I used SDM to configure ezvpn on my 2811 ISR. My internal network is 10.1.28.0 and I set up the vpn pool to be 192.168.45.1-192.168.45.10
After I apply the commands from SDM to the running config, everyone on my internal 10.1.28.0 network can't get to the internet anymore. Also, I can establish a connection with the VPN client and get an ip address, but I can't connect to local network.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...