03-05-2012 07:49 PM
I have been trying many different ways to get this to work but have been unable to. After 8 hours I literally have a headache and have to step away for a minute. I just realized I needed to ping between the tunnels to bring it up but still am unable to. Can anyone take a look and tell me where i've gone wrong? Im trying to configure a site to site vpn betwen :
ASA_A
outside interface 5.179.17.66
inside interface 10.1.1.1
ASA B
outside interface 5.81.57.19
inside interface 10.1.2.1
Solved! Go to Solution.
03-06-2012 04:00 AM
Frist why do you have two DG on box-
route outside 0.0.0.0 0.0.0.0 5.179.121.65 1
route outside 0.0.0.0 0.0.0.0 5.179.17.65 1
Fix it both end then it should work .
Thanks
Ajay
03-06-2012 04:00 AM
Frist why do you have two DG on box-
route outside 0.0.0.0 0.0.0.0 5.179.121.65 1
route outside 0.0.0.0 0.0.0.0 5.179.17.65 1
Fix it both end then it should work .
Thanks
Ajay
03-06-2012 04:52 AM
I just took over managing this device and have overlooked this part of the config. I am not sure why that part of the config would be there. There is just 1 route out to the internet from this device and there is no failover configured. I know you can have a backup static route with a higher metric, but is there any reason that there would be a duplicate other than out of error?
03-07-2012 03:22 AM
You should keep one DG remove the unused.
03-07-2012 05:17 AM
Thank you, this seemed to resolve the issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: