Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

two vpns to same remote destination

I have a scenario where i need to form a second site-to-site vpn tunnel to the same desination network.

Remote site wil have their second pix 506, and my site uses single 515e. i am using same internet link for both tunnels.

how do i configure my pix for this case,

some helps..

thank you guys.

2 REPLIES
Silver

Re: two vpns to same remote destination

What is the software version which you will be using in the cisco boxes ?

New Member

Re: two vpns to same remote destination

my control is only this side pix515.

skypix# show version

Cisco PIX Firewall Version 6.3(4)

Cisco PIX Device Manager Version 3.0(2)

Compiled on Fri 02-Jul-04 00:07 by morlee

skypix up 7 days 3 hours

Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 0013.7ff1.9aa3, irq 10

1: ethernet1: address is 0013.7ff1.9aa4, irq 11

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES-AES: Enabled

Maximum Physical Interfaces: 3

Maximum Interfaces: 5

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

This PIX has a Restricted (R) license.

Serial Number: 809100688 (0x3039e590)

Running Activation Key: 0x13077948 0xae1a4667 0x0d43be6e 0x528bdc84

Configuration has not been modified since last system restart.

skypix# show flash

flash file system: version:3 magic:0x12345679

file 0: origin: 0 length:1966136

file 1: origin: 2097152 length:3566

file 2: origin: 0 length:0

file 3: origin: 2228224 length:3123604

file 4: origin: 0 length:0

file 5: origin:16646144 length:308

skypix#

105
Views
0
Helpful
2
Replies
CreatePlease login to create content