Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC500 and VPN

I have to make a VPN connection with another site and they have these requirements

Encryption AES-256

Hashing SHA-1

Diffie Hellman Support Group5

Preshard Key

Is this possible with an UC500.

Other site is using a cisci 2811 router

Thx

Filip

2 REPLIES
New Member

Re: UC500 and VPN

I'm not an expert but it seems that the UC500 can only be an Easy VPN Server.

This means that you can only have remote VPN client connections to it, or you can also have a remote 2811 acting as an Easy VPN Client. Keep in mind that the UC500 can handle up to 10 tunnels.

Hope this helps.

Re: UC500 and VPN

Your UC500 supports up to 10 VPN sessions, either remote Access or Site to site, you should not have a problem with the setup, you might however check whether the built in VPN module supports your required setup. How to check? simply entering the lines of the config will error you with a not supported hardware something..

243
Views
0
Helpful
2
Replies