Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unencrypted packet recieved while crypto active...

I created two new VPN Groups this morning, on my 3060 concentrator, let's call them "A" and "B". I created A just fine, and created a profile in my VPN client just fine. I then created "B" using the same process. I even made a COPY of profile-A, and renamed it & changed the group-name to form profile-B (meaning a made a copy of a known-good profile) in my client.

When I go to connect, I'm refused right away, with the concentrator saying, "Unencrypted packet received while crypto active!! [dropping packet]".

I used the same process for creating the Group on the VPN Concentrator, and made a copy of a known-good Profile. Any reason this would be happening? I've created & tested tons of profiles before, and never received this error.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Unencrypted packet recieved while crypto active...

Here is a URL that describes your problem. Sounds like it might be a matter of just recreating the group name and password on the concentrator.

HTH

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008026f96c.shtml

4 REPLIES
Silver

Re: Unencrypted packet recieved while crypto active...

Here is a URL that describes your problem. Sounds like it might be a matter of just recreating the group name and password on the concentrator.

HTH

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008026f96c.shtml

New Member

Re: Unencrypted packet recieved while crypto active...

A bad / mismatched group name or PW was the first thing I thoguht of. I'll triple-check again, and if needed, I'll just delete & re-add the group entirely. I'll post what success I have.

New Member

Re: Unencrypted packet recieved while crypto active...

FIXED! Now, when I've had a password mis-match between Concentrator and Client before, the logs actually indicate this clearly. This time, it gave me an error about encryption (see first post) (Not intuitive..)

Anyway, I'm using a weird password that I actually *confirmed* wrong twice. I used NotePad to help me get the PW right, and all is well. Client attaches to concentrator now.

Silver

Re: Unencrypted packet recieved while crypto active...

Please consider rating my response if it helped you resolve the problem. Thanks

3474
Views
0
Helpful
4
Replies