Setup a machine as a tftp servr and from the 3005 tftp the config file to the tftp server. Then on the 3030, upload the file from the server.
This can all be done from the file management section.
You will have to make sure that you have connectivity from the 3030 to the tftp server and if you are leaving the 3005 in place, you will have to change the IP address info so you won't have a conflict.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...