Hello, I have an ASA 5500 series and am looking to set up the AnyConnect VPN. Looking at this guide everything seems fairly straightforward. However, on the inside private network DHCP is setup and I was wondering if it was possible to just use DHCP instead of providing a static address pool? I did not see any option to do this. Any help is greatly appreciated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...