Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Using eToken and Securid for authentication

Hello,

We plan to migrate from the RSA/SecurID to Aladdin eToken PRO Smartcard, I'm wondering if it is possible to have both authentication methods running on an VPN Concentrator 3000 for the time of the migration?

Thanks!

1 REPLY
Bronze

Re: Using eToken and Securid for authentication

Using the Aladdin "R2" model etoken, certain functions can be performed using the certificate even after the R2 token has been detached from the system (USB port). The VPN Client, for instance, can perform an IKE rekey without the token attached to the system. The reason for this is the design of the "R2" etoken: it does not contain the RSA key functions needed and must upload the private key to the system for these functions.

In contrast, the Aladdin "PRO" etoken must be connected to the USB port during an IKE rekey, otherwise the VPN Client connection terminates. This is Aladdin's problem; it is not a VPN Client problem.

219
Views
0
Helpful
1
Replies
CreatePlease to create content