Using RADIUS and ASA to apply IP rules based on groups
We have an ASA 5510 SSL VPN set up here at work and we want to use our RADIUS server to authenticate individual users based on their AD groups. Then, with that information, apply specific IP ranges to those different groups. For example:
General User A will authenticate with the 'GENUSER' group ID in AD. That group must ONLY be able to see these IP's:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...