05-10-2010 08:18 AM
I have the ASA 5510, I just upgraded to Windows 7 and installed the ASDM software. The installation went smoothly but when I launch ASDM all that comes up is the top right of a window, here is a screenshot of what happens.
no errors or anything, I've tried all compatibility modes. I've googled and searched this site but could not find an answer. Thanks in advance
Solved! Go to Solution.
05-10-2010 02:54 PM
ASDM version 6.2.3 onwards supports Windows 7.
Here is the release notes for your reference:
http://www.cisco.com/en/US/docs/security/asdm/6_2/release/notes/asdmrn62.html
Hope that helps.
05-10-2010 03:03 PM
Hi Sari,
You are running 7.0.8 (ASDM 5.0.8) which is quite old now, whereas Windows 7 is a new release and the devlopers dint get much chance to do testing as we moved to 8.x. I suspect that the issue you are facing is due to the compatibility of ASDM software with Windows 7 platform.
You can refer the links below:
Release Notes for ASDM 5.0.8 (Windows Vista is in the list but not Windows 7)
http://www.cisco.com/en/US/docs/security/asa/asa70/asdm50/release/notes/rn508.html#wp139067
*See the ASDM Client PC Operating System and Browser Requirements section*
I would suggest you to upgrade the code to 8.2 and ASDM to 6.2 to make it running on Windows 7
Release Notes for ASDM 6.2.x
http://www.cisco.com/en/US/docs/security/asdm/6_2/release/notes/asdmrn62.html#wp194641
Release Notes for ASA 8.2.x
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html
Upgrade should be done in the following train
7.0 > 7.2 > 8.0 > 8.2
Hope this answers your post.
Regards
Mohit
05-10-2010 08:22 AM
Sari,
Can you launch ASDM on this ASA from a different machine?
I want to make sure that you you have the correct ASDM version according to the OS version.
Federico.
05-10-2010 08:42 AM
I can on XP, I havent tried on Vista since we dont have any computers running it. I installed the same as I used on XP before the upgrade. I'm not sure the version though, where can I find the version number?
05-10-2010 08:43 AM
If you have access to the CLI, you can do a ''sh ver'' and you should get something like this:
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Federico.
05-10-2010 08:58 AM
I'm not sure how to do that.
05-10-2010 09:00 AM
To access the Command Line of the ASA you have these options:
1. Console access (connect a computer with a console cable to the ASA's console port and access the device via a terminal program like hyperterminal, putty, SecureCRT, Teraterm)
2. Telnet (if having telnet configure) You can telnet to the Inside IP of the ASA from the local LAN or directly connected with an Ethernet cable.
3. SSH (if having SSH configured).
Federico.
05-10-2010 10:05 AM
ok, i was able to log in on one of the servers. here is what you asked for
Cisco Adaptive Security Appliance Software Version 7.0(8)
Device Manager Version 5.0(8)
05-10-2010 12:57 PM
Sari,
I don't see a release note for the ASDM version that you have.
Would you be able to upgrade the ASDM version?
Take a look:
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
Federico.
05-10-2010 02:50 PM
I don't mind upgrading, but if the release notes don't specify and OS, how do I know which one is compatible with Win7? Thanks for your help
05-10-2010 02:54 PM
ASDM version 6.2.3 onwards supports Windows 7.
Here is the release notes for your reference:
http://www.cisco.com/en/US/docs/security/asdm/6_2/release/notes/asdmrn62.html
Hope that helps.
05-10-2010 02:58 PM
To run ASDM version 6.2.x, you would also need to upgrade your ASA to at least version 8.0, as ASDM 6.2.x is only backwards compatible to ASA version 8.0, 8.1 and 8.2.
05-10-2010 03:03 PM
Hi Sari,
You are running 7.0.8 (ASDM 5.0.8) which is quite old now, whereas Windows 7 is a new release and the devlopers dint get much chance to do testing as we moved to 8.x. I suspect that the issue you are facing is due to the compatibility of ASDM software with Windows 7 platform.
You can refer the links below:
Release Notes for ASDM 5.0.8 (Windows Vista is in the list but not Windows 7)
http://www.cisco.com/en/US/docs/security/asa/asa70/asdm50/release/notes/rn508.html#wp139067
*See the ASDM Client PC Operating System and Browser Requirements section*
I would suggest you to upgrade the code to 8.2 and ASDM to 6.2 to make it running on Windows 7
Release Notes for ASDM 6.2.x
http://www.cisco.com/en/US/docs/security/asdm/6_2/release/notes/asdmrn62.html#wp194641
Release Notes for ASA 8.2.x
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html
Upgrade should be done in the following train
7.0 > 7.2 > 8.0 > 8.2
Hope this answers your post.
Regards
Mohit
05-11-2010 08:52 AM
Thanks so much, I have a lot of trouble navigating Cisco's website. I couldnt find those releases that supported windows 7 and the corresponding upgrade for the ASA, thanks for linking those pages!
05-11-2010 09:29 AM
Sari,
Glad i could help. Please tag this thread post as ANSWERED, to fasten the resolution process for other users in the community with similar queries.
Regards
Mohit
11-09-2010 03:09 PM
Not sure if this will help you but we just installed ASDM on a Windows7 machine and the install went very smooth but when you try to run the program a second time it fails with a message about not finding javaw.exe.
We checked the properties on the shortcut and it was pointing to the wrong location for some reason.
Once we copied over the correct location it works perfectly.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: