It's an intermittent problem. The VPN client will connect and authentication via RSA SecurID. The tunnel will become successfully established. However, no IP traffic will pass between the client and the "internal" network behind the VPN 3005 Concentrator.
When the problem exists, I examine the VPN Tunnel | Stats window.
It lists the following:
Does anyone have any idea as to where the problem may lie? It's pretty intermittent, but I does fairly often.
I have sometimes had some success with symptoms like this if I have the client change the transport tab (open the VPN client, select the profile, select modify, select the transport tab) to switch from UDP to TCP or the other way.
I believe that I have seen this type of symptom and when I had the person do an ipconfig, there was an incorrect gateway address. You might check this the next time you run into this problem.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...