VPN 3005 with Checkpoint Integrity desktop failures ??
we are currently set up with vpn client 4.8 and connecting to 3005 4.7x and we have the concentrator checking that the client has the Integrity desktop installed. We have very bad connection issues that the IS client and server are never able to talk to each other but the concentrator and the IS client seem to talk fine. Occassionally the client is able to connect to the network resources but more often than not the vpn client is always able to connect but no traffic is passed/encrypted. We are able to overcome this issue but unchecking the firewall required option. We then receive no failures. This has never worked properly and just wondered if anyone has encountered these specific problems with the checkpoint/cisco configuration we have here?
Re: VPN 3005 with Checkpoint Integrity desktop failures ??
i think we have the same problem here with a VPN3030 and Checkpoint.i have made the same tests like you and with the firewall unchecked its works but not more then one time.i have changed the software on the conc but without success.i have downgraded the client software nothing.on the other side we have installed the new checkpoint cluster and since this time we have found the same problems like you.in the next day we will use sniffer and so one to find anything.i will inform you about our success..
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...