Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpn 3008 remote access

any tip of vpn 3008 remote access configuration,I configured it but it's given error (Reason 412 the remote peer is not longer responding but there is no firewall,just trying it without firewall before puting behing firewall.

3 REPLIES
Cisco Employee

Re: vpn 3008 remote access

If the remote clients are connecting over patting device then NAT-T need to be enabled on concentrator. What version of VPN client you are using? Can you provide logs from teh VPN client set to debug level(3). Did you tried with multiple machines? What is the OS?

Check this for config examples

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2284/prod_configuration_examples_list.html

Thanks

New Member

Re: vpn 3008 remote access

Find attached the logs from the client nad there is no firewall I just connect to public network and trying it before putting it behind firewall.

Cisco Employee

Re: vpn 3008 remote access

There are no logs in the file. Probably you havent enabled the logging or havent tried to connect after the logging was enabled

Thanks,

216
Views
0
Helpful
3
Replies