Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN access to several VLANs

My clients network is broken up by VLANs

VLAN 5,10,15, and 20

When I VPN in I can only access the native VLAN. So my server on 192.168.1.x, I can RDP to no problem. However, my server on 192.168.5.x, I can no longer RDP to. I cannot ping any address on VLAN5.

Something in my config changed because I was able to access all the VLANs via VPN.

What changed?? I have attached my config.

Thanks!!

John

3 REPLIES
Cisco Employee

Re: VPN access to several VLANs

John,

Your split tunnel configuration is allowing only traffic destined to 192.168.1.0/24 through tunnel. If you want to tunnel, 192.168.5.0/24, then you need to include this subnet in the Split Tunnel ACL.

split-tunnel-network-list value KWRE_splitTunnelAcl

access-list KWRE_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0

Regards,

Arul

*Pls rate if it helps*

New Member

Re: VPN access to several VLANs

Duh!! That worked!!! Thanks a lot!!!!

Cisco Employee

Re: VPN access to several VLANs

John,

Glad to help.

Regards,

Arul

137
Views
10
Helpful
3
Replies
CreatePlease to create content