cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9434
Views
0
Helpful
11
Replies

VPN and Ipad

luca71RODDICK
Level 1
Level 1

I have a problem with ipad.

Doesn't work the vpn !!! With configuration IPSEC CISCO.

Help me !! I have a firewall Pix 515E , there are any problems ??

Thanks

Se rispondete in italiano è meglio !!

Grazie

11 Replies 11

Gavin Barber
Level 1
Level 1

What type of tunnel? Split or tunnel everything?

And we will need to know authentication configuration, shared key or user logon required?

Tunnel everything and user logon required 

The PIX will need to be running 8.x code or later.  Below is a sample configuration that has worked for other iPad customers on an ASA.

crypto ipsec transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto isakmp policy 10
  authentication pre-share
  encryption 3des
  hash sha
  group 2
  lifetime 86400
crypto isakmp nat-traversal

group-policy BasicPolicy internal
group-policy BasicPolicy attributes
  password-storage enable
username basic password uc/Xo0s4BJ1CCT.d encrypted
tunnel-group DefaultRAGroup ipsec-attributes
tunnel-group Basic type remote-access
tunnel-group Basic general-attributes
  default-group-policy BasicPolicy
  dhcp-server 10.10.253.1
tunnel-group Basic ipsec-attributes
  pre-shared-key letmein

I have version 7.x , perhaps this is the problem.

thank you a lot    

Hi,

I have a question concerning VPN and iPad or iPhone.

I have a configuration which works with VPN client on a computer and also on iPad or iPhone.

But on these two last the lifetime parameter is not supported. The value is fixed to 1 hour. (even if in the router the value is 12 hours).

This seems to be a bug ... could you tell me if a solution exists?

Regards,

Lionel.

Unfortunately this would be a question for Apple as they directly support the IPSec client on the iPhone and iPad devices.  Their support information is included below.

http://www.cisco.com/en/US/partner/docs/security/vpn_client/cisco_vpn_client/iPhone/2.0/connectivity/guide/iphone.html

Oh Ok no problem ;-)

Thks for your answer.

Lionel

I don't have to your URL :s

Where do I find information on how to configure this client?

For Apple iPhone configuration information, please visit the Apple support area at:


http://www.apple.com/iphone/enterprise/integration.html


Configure your Cisco security appliance exactly as you would to support connections from the Cisco VPN Client (IPSec).


How do I receive support?


Apple directly supports the Cisco VPN Client on the iPhone, including the new 3.x functionality.


To receive support, please contact Apple at Consumer Technical Support:


http://www.apple.com/support/iphone/enterprise or


800-APL-CARE (800-275-2273), 8:00 a.m. to 8:00 p.m. Central Standard Time


Which Cisco platforms work with the Cisco VPN Client on the iPhone?


Cisco  ASA 5500 Security Appliances and PIX Firewalls. We highly recommend the  latest 8.0.x software release (or greater), but you can also use 7.2.x  software.


Cisco routers running IOS Release 12.4(15)T and later.


The VPN 3000 Series Concentrators do not support the iPhone VPN capabilities.

Hello Todd,

did you've noticed this Cisco document: "

We do not support VPN access from the Apple iPad at this time."

Supported VPN Platforms, Cisco ASA 5500 Series (Revised: Aug 13, 2010, OL-19674-21)

http://www.cisco.com/en/US/docs/security/asa/compatibility/asa-vpn-compatibility.html#wp147071

I was actually the person who raised the bug to have the documentation updated.  Officially, the iPad has never been tested but "should" work.  Having not been officially test, we cannot claim support.  Speaking from practical experience dealing customers day in and day out, I have seen customers successfully connect iPads to an ASA.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: