I've installed the CISCO VPN (ver 5.0.04) on several new Windows 7 laptops. I have two laptops which appear to connect to the VPN but can't ping the address of the server that has the software application. For this reason the application times out. In the Options Statistics most packets are being bypassed. All of the PC's were configured in the same manner are working in production with the exception of these two. Any ideas on how to correct this issue.l
The laptops are 32-bit. I have two that I have not installed which are 64 bit. I wanted to get the 22 32-bit laptops up first then move on to the two 64-bit. Nineteen are working fine which is why it is so puzzling that these two don't work.
We are using a CISCO 2851 ISR for the VPN. As far as the Route details under Options - Statistics - there are no entries on the Local Lan Routes side. On the Secured Route side it has the IP address to the server that hosts the application and the SubNet Mask of 255.255.255.0.
All of the laptops that have been configured thus far are 32-bit. The other laptops are also connecting to the same Secured Route. They won't all be connected at the same time as it is dependent on work schedules.
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :