VPN Cencentrator 3015 | Restict Access to a Single Host
I am curious if it is possible to configure a VPN group on a 3015 that would only allow the VPN user access to one machine in the network and nothing else.
i.e. VPN for a vendor that only allows access to the machine they support.
I understand they could jump off from that box, but assuming that wont be an issue, can it be done. If so is it hard to configure? Any good docs out there that explain this. I have no vpn concentrator experience so this is all very new to me.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...