Configured CA parameters on the ASA and Router, the enrollment was successful and confirmed that the certificate request has been sent to the CA. below are the messages,
% The fully-qualified domain name in the certificate will be: R3.inet.com
% The subject name in the certificate will be: R3.inet.com
% Include the router serial number in the subject name? [yes/no]: y
% The serial number in the certificate will be: 27572561
% Include an IP address in the subject name? [no]:
Request certificate from CA? [yes/no]: y
% Certificate request sent to Certificate Authority
% The certificate request fingerprint will be displayed.
% The 'show crypto ca certificate' command will also show the fingerprint.
When I do "show crypto ca certificates" I don?t see the certificate for the router/ASA, also there are no pending requests on the CA server too. I couldn?t figure what I am doing wrong here. Can someone help? Thanks in advance
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...