i'm trying to establish a VPN connection using Aladdin USB eToken PRO. According to installation guides I should see a certification store when creating a new connection. (Radio Button in the left corner of new connection window named "Certificate Authentication".
But the dropdown box keeps emty.
I installed everything on a fresh XP System using different order in installation (first Aladdin RTE3.6, then VPN-Client, first VPN-Client then RTE...).
What I am doing wrong?
I used different Version of VPN-Client 4.7, 4.8, even 4.0 and 3.6.6.
This document demonstrates how to use the eToken with Cisco IOS. Software Release 12.3(14)T. This software release introduced support for the USB drivers into Cisco IOS Software for both flash memory and eToken secure memory. The security provided by the eToken (also known as an Aladdin USB eToken key) makes it attractive for storing and distributing secure information, such as VPN credentials and software configurations. eToken support is enabled on certain models of Cisco Systems. routers with a built-in USB port, such as the Cisco. integrated services routers
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...